Just bought a new 50mbps Xfinity router blinking orange. Setting it up and it’s blinking orange? You’re not alone! Here are some ideas for why the Xfinity router is orange blinking and how to fix it.

What is an XFINITY router?

An XFINITY router is a device that allows you to connect to the internet and use it to access the internet. It usually has a number of ports that you can use to connect to the internet, and it also has a number of lights that indicate the status of the connection. One of the lights is the power light, which should be green when the router is turned on. The other light is the status light, which will be green when the router is connected to the internet and will be orange when it is not.

Why might a router be blinking orange?

There are a few reasons why your XFINITY router might be blinking orange. One reason could be that the power cord is loose and needs to be plugged in tighter. Another reason could be that there is a problem with the internet connection. If the router is connected to the modem but the internet is not working, it could be that the modem needs to be reset. If you have tried these things and the router is still blinking orange, it might be time to contact XFINITY customer service for help.

Common causes of flashing routers

There are a few different reasons why your XFINITY router may be flashing orange. One common reason is that the firmware needs to be updated. Another possibility is that the router is overheating, which can be caused by dust buildup or other factors. If the router is still under warranty, you may be able to get a replacement from XFINITY.

If your router is flashing orange, it’s important to identify the root cause so you can take the appropriate steps to fix it. In most cases, a simple firmware update or cleaning of the router will do the trick. However, if the problem persists, you may need to reach out to XFINITY for assistance.

Troubleshooting steps for an XFINITY Router

If your XFINITY Router is blinking orange, it could be due to a number of reasons. Here are some troubleshooting steps that may help you fix the issue:

1. Check the power adapter and make sure it is properly plugged into the router and the outlet.
2. Check your internet connection and make sure it is working properly.
3. If you are still having problems, you can try resetting your router by unplugging it from the power outlet for 30 seconds, then plugging it back in.
4. If the problem persists, you may need to contact XFINITY customer support for further assistance.

Replacing a wireless router with an XFINITY Wi-Fi Hub

If you’re having trouble with your XFINITY router blinking orange, one possible solution is to replace it with an XFINITY Wi-Fi Hub. Here’s a step-by-step guide on how to do it:

1. Unplug your old router and connect the new XFINITY Wi-Fi Hub to your modem.
2. Plug in the new router and wait for it to power on.
3. Once the new router is on, log in to your XFINITY account and follow the prompts to activate your Wi-Fi service.
4. Follow the instructions in the XFINITY My WiFi app to finish setting up your new Wi-Fi network.

With your new XFINITY Wi-Fi Hub set up, you should have no trouble keeping your devices connected to the internet.

Conclusion

If you’re experiencing a blinking orange light on your XFINITY router, it’s likely due to an error with the device. Thankfully, there are a few things you can try at home to fix the issue. If none of those work, you may need to contact customer support for help. In any case, we hope this article has been helpful in troubleshooting your blinking orange light issue.